-
A.A. Jansson, Inc.'s metrology standards and precision equipment calibration services have been providing customers with complete confidence confidence in instrument and equipment accuracy for more than 50 years. Measurement and test equipment accuracy is critical to the quality of your production and regular precision calibrations are essential to ensure ongoing reliability. Our calibrations are NIST Traceable and customization to client specific demands.
-
AALFA-KAL Metrology Laboratory, division of Aalborg Instruments & Controls, offer calibration services on meters and controllers on various products. Our laboratories are fully equipped to perform NIST traceable flow calibrations for rotameters, mass flow meters and mass flow controllers. We can also calibrate NIST traceable approved “in-house” equipment to certify our primary calibration devices.
-
ACR performs ANSI/Z540, A2LA and ISO 17025 calibration services, which include, but are not limited to, pressure, vacuum, fiber and electrical. We also hold NAVSEA certification. We offer calibration testing services and software as well as instrument calibration. On-site or off, ACR can support your needs.
-
Our calibrating services can take us to your site or you may experience the repairs of your test and measurement equipment in our service center. We perform calibrating services in our calibration laboratory, which is A2LA® and ISO 17025 accredited. ATS also has ISO 9001-registered repair centers.
-
As an Independent Dealer, we offer calibration services on high precision equipment. Services include assistance with industrial automation, data collection, PLC integration, and weighing system design. American Scale has been serving the Mid-Atlantic area since 1975. We sell truck scales, bench scales, counting scales, crane scales, floor scales, indicators, checkweighers, scale repair and calibration services and balances.
-
AppMet calibrates and tests all types of electronic and electrical test equipment from Multimeters to RF Spectrum Analyzers. With precision, fast turnaround and attention to your certification and testing needs.
-
Since 1955, Assurance Technologies has been a leading calibration service provider for tools and gages. We perform instrument calibration, laser alignment, temperature calibration, electronic calibration, hand gage calibration, torque calibration, pressure calibration and much more. ISO/IEC 17025:2005 Accredited.
-
Beamex is a leading worldwide provider of calibration solutions that meet even the most demanding requirements of process instrumentation. Beamex offers a comprehensive range of products and services—from portable calibrators to workstations, calibration accessories, calibration software, industry-specific solutions and professional services.
-
Bio-Tek Services is a USA-based premium in-lab and mail-in pipette repair, calibration and certification service. Our focus is on the critical needs of the modern calibration lab. We specialize in providing expert repair, precise calibration and detailed documentation of all brands and types of Pipettor.
-
Bobier Tool Supply performs calibration services for inspection equipment—height gages; optical comparators; shadowgraphs plus manual and video CMMs. We offer high-speed grinding and manufacture metrology equipment. Our calibrations are to NIST standards and QS 9000/ISO 9000 accredited.
-
We provide calibrating services for optical tooling and other precision instruments in addition to the production of such devices. Our calibration laboratory is ISO/IEC 17025:1999 accredited plus meets ISO 10012-1, ASME NQA-1 1989, ANSI/NCSL Z540-1, and MIL-STD 45566 2A standards.
-
Since 1995, C & C has been providing companies with refurbished environmental test chambers. Services include scientific equipment, temperature, humidity, thermal shock and ESS system service plus fully equipped testing. We provide service contracts to companies in North Carolina only.
-
For calibration services and maintenance, call CCSi. We have an ISO/IEC 17025 Accredited Calibration Laboratory in order to calibrate durometers, cutting dies, gauges, thermocouples, thermometers, pressure transducers, ovens and environmental chambers, as well as to perform other instrument calibrations.
-
Central Carolina Scale offers industrial and consumer scales and customized weighing systems as well as sales, service and calibration of weighing scales and balances.
-
CPI’s calibrations are performed in our environmentally controlled laboratory by our highly trained staff of technicians. If you have a high volume of calibrations, we can arrange for a permanent on-site technician to assume all responsibilities of operation or establish an on-site calibration department. We offer competitive pricing, fast professional service & detailed traceable certifications.
-
A2LA Accredited to ISO/IEC 17025 and with offices in VA and NC, Control Automation Technologies Corporation has provided field instrumentation services since 1989, including calibration, installation, maintenance & start-up. CATLab, CATC's Accredited Laboratory offers Test Equipment Calibrations for electrical, pressure, temperature, humidity devices & more.
-
Provider of calibration services, instrument calibration and gauge calibration. CyberMetrics Corporation's products help to improve quality and reduce costs. We specialize in Calibration Management Software for all of your calibration needs.
-
Dorsey Metrology is pleased to announce the recent accreditation of its calibration laboratory to ISO 17025:2005 status. This accreditation allows Dorsey to perform ISO 17025 calibration for our optical comparators, dial indicators, digital indicators, ID/OD gages and masters, depth/height gages and masters, and thickness gages and masters, both old and new. For more information, call today.
-
Electronic Laboratories offers a highly trained staff of experts in the calibrating services. ELI services most industries from RF (to 50GHz) to biotech (Validation services Included). We offer high-quality at affordable prices. On-site calibration minimizes the costs of shipping products.
-
Essco Calibration Laboratory provides calibration services for
commercial test equipment. Our capabilities include electronic, fiber optic,
mechanical, temperature, pressure, mass and torque instrumentation. ISO
17025:1999 accredited by A2LA.
-
ETI is a leader in the calibration of critical test and measurement equipment. Our NIST-traceable calibration services encompass a wide variety of electrical, mechanical, radio frequency (RF), pressure, physical-dimensional, and environmental instrumentation. As a long-term manufacturer of circuit breaker testers, we also have specialized knowledge, tools, and expertise calibrating high-current ammeters that can’t be found at other calibration laboratories.
-
ISO 9001:2015 certified manufacturer of calibration equipment including transmitters, control valves, gauges & pressure sensing instrumentation for the oil refinery, power generation, paper processing, pharmaceutical & cosmetic manufacturing industries.
-
Our laboratory's calibrating services are performed for flow meters; NIST traceable; conducted for primary standard liquid and gas flow. We also manufacture precision flow metering instruments, ancillary electronics, plus liquid and gas flow calibrators.
-
Graftel maintains a complete calibration lab for gas flow, liquid flow, air velocity, RH/dew point and temperature. Calibration work is accredited to ISO 17025 and performed in compliance with ANSI/NSCL Z540-1-1994 requirements. Laboratory equipment is maintained in accordance with MIL-STD-45662A.
-
When it comes to calibration services, you want only the best. We only want the best for you, which is why we offer ISO 17025 certified procedures. We use state of the art technology to provide you with accurate, on-the-spot calibration readings. If you would like to learn more about our services or company, visit our website online or give us a call today!
-
Griffin Instruments provides instrument calibration, as well as rental and repair of radiological instrumentation (Ludlum, Bicron, etc.). Our calibrations are to ANSI N323 standards, including the maintenance database kept on the equipment. See our website for more.
-
HABCO, Inc. designs and manufactures calibration and testing supplies for industry, aerospace and many other applications. We will utilize over 35 years of experience to bring you high-quality equipment calibration products. Allow our dedicated engineers to design for your testing needs.
-
Hamar Laser Instruments, Inc. has been a leader in calibration and testing equipment for 35 years. We can design laser alignment systems and other calibration and testing equipment. Our lasers are known for their accuracy and reliability. Let us design, manufacture or service your equipment today!
-
We offer precision weights, laboratory equipment and pressure calibration services, including weights, fixed point and comparison temperature, pipette, thermal mass flow, humidity plus time and frequency. Our mass flow calibration is ISO/IEC 17025 compliant. Our company is ISO 9001 certified.
-
Hoffman Engineering offers a variety of calibrating services as well as certification services. We specialize in equipment calibration, laboratory calibration and testing that has been produced with innovative software to ensure your exact measurements are met.
-
IET Labs performs calibration services such as pressure calibration, no matter the manufacturer. We are compliant with A2LA, IS0 9001, ISO 17025, ANSI Z540-1-1994 and MIL-STD-45662A. R-C-L, RTD standards and decades, voltage and current source, strobes audio.
-
IN-CAL™ is a leading provider of calibrating services. Our comprehensive list of calibration services includes electronic calibration and mechanical calibration. Our services are available as on-site calibration and in-house calibration. We are ISO 10012-1 and ANSI/NCSL Z 540-1-1994 compliant.
-
Since 1952, our specialty has been the calibration and repair of electronic precision test and measurement equipment. ISO/IEC 17025:2005 accredited, we offer electrical heating elements for cartridge heaters, band heaters, air heaters, tubular heaters, strip heaters, immersion heaters and more. Calibration services and on-site repair is also available.
-
Instron® offers unmatched capability in force and hardness calibration plus other verifications, including temperature, strain, speed, displacement and torque. Calibration software is pre-tested. Lab/field services meet or exceed ASTM and ISO. Accredited to ISO 17025 by NVLAP (lab code 200301-1).
-
Instrumentation Technical Services, Inc. is a leading provider of calibration services for multiple industries. We can offer flow control, pressure calibration and many other types of calibration and testing. We also provide technical support and preventative programs to better serve you!
-
Integrated Scale Systems is a leading supplier of industrial scales, laboratory scales, balances, scale calibration and scale repair. Integrated Scale Systems is an ISO 9001:2008 certified company and services the entire Tri-State area. Products include: floor scales, platform scales, lab scales, counting scales and more. Expert scale calibration and repair with 24 hour service available.
-
Our specialty is in traceable calibration services for name-brand equipment. ISO 9001:2000 certified, our turn around time is 1-3 days with competitive calibration services costs. Using NIST standards accuracy, Laerie, Inc. uses calibration software that handles a range of T&M equipment.
-
Measurement & Machine Technology provides laser alignment, calibration measurement and laser calibration services on a wide variety of machine tools. We offer many years of experience and can service almost any make or model of machine. See our website for more.
-
Micro Precision develops and maintains calibration services and repair services that assure levels of accuracy for your T & ME and gage blocks to high-end electronics. We also have a calibration laboratory, software and pressure calibration to meet your needs. IS0 9001:2000, ISO 17025, NIST Traceability.
-
Working with measurement instruments and providing calibration services since 1967, we are the company you want to contact. We meet special gaging requirements and perform equipment calibration and repair in our A2LA 17025-accredited calibration laboratory. We look forward to your contact.
-
Northeast Metrology offers a wide range of calibrating services. We provide electrical calibration, mechanical/dimensional calibration, pneumatics calibration and temperature calibration for a long list of items. Calibration equipment complies with the ISO/IEC 17025:2005 International Standard.
-
Our capabilities include manufacturing pressure vessels, autoclaves, ASME tanks, nuclear fuel casks, nuclear reactor vessels and other specialized process equipment. We specialize in heavy precision metal fabrications for industrial, commercial and government use. Call us today.
-
We do inspection, certification, and tooling, along with our calibrating services. Precision Technologies, Inc. is an ISO/TEC 17025 certified calibration laboratory offering precision measuring services on certified metrology equipment. In addition, we offer new and used calibration equipment.
-
Established in 1989, Prime Technologies has offered quality management products and services to a number of industries for almost twenty five years. We are proud to be innovators in our field, providing solutions with the latest technology including our widely successful proprietary ProCalV5 professional calibration software and the first paperless 21CFR Part11-compliant calibration system. Call or visit our website today for details!
-
Process Measurement Company is an ISO/IEC 17025:2005 accredited calibration lab, offering instrument calibration services and equipment calibration to a wide variety of industries. Our calibration company is headquartered in Minneapolis with offices in Denver, Kansas City and Omaha. We calibrate, repair and certify electrical, dimensional, mechanical, and physical measuring equipment using NIST-traceable standards. PMC also offers field services, saving our customers time and money.
-
Since 1928, The Pyrometer Instrument Company has been leading the industry in precision temperature measurement, laser alignment, calibration and testing and equipment calibration. Using the Blackbody Calibration Source, we'll check temperature range, aperture and emissivity. We have bench, floor and portable models.
-
R.A.E.S. Calibration Services has served the industry with calibration, repair and N.I.S.T. Traceable certification of electrical, electronic, medical, optical, telecommunication, test instrumentation for many years; catering for most specialized parameters such as porosity, pH, ultrasound, Ultraviolet, infrared, visible light, absolute power, attenuation, insertion loss, return loss, sensitivity, optical length/distance, index of refraction IOR, wavelength / frequency, linearity, stability, chirp, phase, chromatic dispersion, PDL, PMD, Skew, Delay time, strain, relative humidity, gloss, flow, force, acceleration, torque, weights as well as the standard parameters such as temperature, pressure, voltage, current, resistance, frequency, capacitance, Inductance, power.
-
S. Himmelstein and Company provides accredited ISO/IEC 17025:2017 calibrations from 10 ozf-in to 4 million lbf-in. The 4,000,000 lbf-in stand is one of only four worldwide that are accredited for calibrations above 1,000,000 lbf-in and has the lowest measurement uncertainty of any. We have nine accredited stands that provide optimal measurement uncertainty and avoid queuing. Calibrations are made for Himmelstein transducers as well as those from other manufacturers. Contact our experts today.
-
Stephens Analytical specializes in humidity instrument calibration services and has a calibration laboratory. Since 1982, we have been producing calibrating dew point indicators, hygrometers, relative humidity meters and trace moisture analyzers. Our lab is ISO/IEC 17025 accredited.
-
Sypris® is a leader in the calibration industry and provides such calibration services as instrument calibration and machine calibration. We use our own state-of-the-art calibration software and laboratories for your convenience.
-
Techmaster Electronics offers complete repair and calibration services on most electronic equipment. We calibrate all electronic equipment up to 50GHz—mechanical and dimensional, bio-medical equipment—as well as offer full turnkey contracts and discounts.
-
We offer expert A2LA-accredited calibration services for all
types of calibration, test, and measurement instruments including calibrators, temperature calibration, electrical, electronic, pressure, physical, mechanical and RF instruments. Located across North America.
-
Internally-known, Dynamic Technology is an NVLAP®-accredited calibration services facility. We conduct vacuum and pressure calibration; mass and torque calibration; temperature calibration and electronics calibration. We have a physical/dimension laboratory and can perform repair services as well.
-
TTE Laboratories specializes in calibrating services including load cell calibration and gage calibration services. Our calibration services are utilized for nearly any force measurement application and this even includes custom designs. These are very easy to use and our products offer consistent results. Call us if you have questions about our calibrating services.
-
For over 55 years, our company has provided calibration services and repair services. We can calibrate most torque wrenches in addition to manufacturing them. Our certification of accuracy is standard and our calibration lab is available for your use. We can calibrate and certify any torque product.