Plastic Enclosures

Plastic Enclosures

Plastic remote controls are an example of plastic enclosures; they are first fabricated and then fitted with circuitry and plastic or rubber buttons. Plastic enclosures can be video game controllers, computer enclosures and electrical component housing. They can house televisions, wireless Internet routers, calculators, motors, coolers and an extensive variety of other industrial, commercial and consumer products. Plastic enclosures offer some features that metal enclosures cannot. They are highly customizable and can be molded into a greater variety of shapes than metal. They can be more lightweight, less electrically conductive and better insulated than metal enclosures. Their lightweightness makes them especially useful in the construction of portable electronics like laptop computers. Plastic enclosures keep electronic components together and prevent them from becoming contaminated by dust or damaged by impact.

A wide variety of plastic materials are available for the fabrication of plastic enclosures. For sturdier applications, high-density polyethylene (HDPE) is often used because of its strength, durability, resistance to extreme temperatures and its relative low cost. Other sturdy plastic materials like PVC and ABS may also be used in the construction of sturdy plastic enclosures. Each of these different materials has one thing in common: the method by which they are formed into usable enclosures. HDPE, PVC and ABS are all thermoplastics, which means that they can be formed when subject to high heat. The thermoplastic forming method most commonly used to create plastic enclosures is molding. During molding processes, a collection of raw plastic stock is gathered and heated to its melting point. At this point, molding methods deviate from each other slightly. During injection molding, the plastic can be injected into a mold cavity, which is a shape designed to be filled with molten plastic in order to give the plastic its shape. In blow molding the process is similar, except that compressed air is blown into the cavity to make the inside of the plastic become hollow. In both methods, after the formation process is complete, the plastic is allowed to cool and harden, after which it is ejected from the mold as newly-formed plastic enclosure parts.

Plastic Enclosures Images Provided by POLYCASE