Contact Us

Metal Shears

Alligator Scrap Metal ShearIndustrial metal shears are used to cut large pieces of metal, particularly sheet metal. The shearing machine cuts the metal into thin strips as it is fed into the machine, turning it into dozens of smaller pieces that can easily be transported, melted down, and used again for another product.

Some shearing machines are very simple and they cut the metal simply by using the energy transferred when the operator presses down on the foot pedal, while others are hydraulically or mechanically powered. Within the machine itself, there are sectional knives or sliding blades that have the ability to cut cleanly through the sheet metal when they are forced down on it. Cutting isn’t always designed to take place on a perfect 90 degree angle since it actually requires less force to cut diagonally through the material. For this reason, many metal shears have angled blades.

Metal is inserted into the shearing machine from the shear table, a work table upon which the machine rests. This table supports the metal as an operator slowly slides it into the machine for cutting. Some metal shears are mobile so that they can be moved around a scrap yard or large recycling facility, while others are built to be stationary and compliment a complete recovery process.

Scrap Metal Shear AttachmentSome metal fabrication shops receive large pieces of sheet metal directly from suppliers who have reclaimed it from other facilities or who no longer need it themselves. The workers in the fabrication shop can use metal shearing machines to straighten the edges of the metal or cut it down to a size that matches a set of specifications for a project they are working on. This is a much more cost-effective way to manufacture metal products than if the fabricators were to purchase 100% of their metal brand new.

Some metal shear machines are built into large industrial balers, so that metals can be continuously sheared and baled in a large scale operation. Shearing in an operation like this creates metals in a more consistent size, which is perfect for baling since the idea is to have uniformly shaped and sized units for shipping.

Harris Waste Management Group, Inc. - Metal Shears

For over 100 years, we've been an industry leader in manufacturing scrap recycling and processing equipment. And for over 100 years, we've maintained this position by paying attention to our customer's needs. Day in. Day out.

http://www.harrisequip.com/ | Email This Company | Phone: 800-468-5657 | 315 W 12th Ave Cordele, GA 31015

Recycling Process Diagrams

plastic recycling process diagram
waste heat recovery diagram
Plastic Recycling
Waste Heat Recovery
paper recycling process diagram
Paper Recycling