Test and Measurement Equipment Manufacturers and Companies
Testing and Measurement equipment manufacturers provide a wide range of products and services to assist in the development of standards related to performance, safety, and quality. Many industries rely on testing and measurement equipment to comply with and improve processes, such as healthcare, automotive, biotechnology, and pharmaceuticals.
Types of Test and Measurement Equipment:
Calibrating services are performed to measure the reading, or output, of a device and compare it to accepted standards set by the manufacturer and the industry. Calibration devices use electrical signals to calibrate instruments. Once the margin of error has been determined and verified, the device can be adjusted to values identical with the standard in order to maintain a standard, high-quality output.
Since 1952, our specialty has been the calibration and repair of electronic precision test and measurement equipment. ISO/IEC 17025:2005 accredited, we offer electrical heating elements for cartridge heaters, band heaters, air heaters, tubular heaters, strip heaters, immersion heaters and more.
TTE Laboratories specializes in calibrating services including load cell calibration and gage calibration services. Our calibration services are utilized for nearly any force measurement application and this even includes custom designs. These are very easy to use and our products offer consistent results.
Total customer satisfaction is our promise here at Precision Calibration Systems. If you're looking for fast and accurate calibration services, you've come to the right place. The scope of our capabilities includes analytical balance, caliper, digital thermometer, electrical measure, electrical source, hardness testers, micrometers and so much more.
Clean rooms are enclosures designed to facilitate sensitive research, fabrication and other operations that must take place in the absence of dust, moisture and other airborne contaminants. Clean rooms systems were first developed in response to the needs of the aerospace and microtechnology industries in the early 1960s. As those and other high-tech disciplines like bio-technology and medical research developed, and as products and research subjects became smaller, airborne contaminants became increasingly disruptive. The rigidly controlled environments with which these professionals began to surround their work came to be known as clean rooms.
Abtech specializes in manufacturing, design and installation of Clean rooms and Clean Room Equipment including Laminar Flow Benches and Air Showers. Offering cleanroom levels from Class 100,000-10 to ISO Class 8-Class 1, compliant with federal standards 209E.
We make a variety of different clean room ceiling systems for clean rooms. We work to build our clean room ceiling systems for any clean rooms. Our products go through vigorous testing to ensure the highest durability resulting in long lasting customer satisfaction.
For the very best of clean rooms, look no further than Clean Rooms International! We can provide the ultimate in quality, customer service, durability, and unique designs just for you!
Look to us to provide the very best in customer service. We work with you long past the point where other companies quit. We offer support for our products after installation and stock a variety of repair parts so you can fix your issue and get back to work fast!
Data acquisition systems are devices that are used to collect information and convert it to digital values to be utilized as useable data for a user. These products gather measures for different types of items such as temperature, pressure, sound, voltage, light intensity, fluid force and more.
DCC Corp. is a major manufacturer of thermocouple welders and we supply thermocouple wire. Here at DCC Corp. we also offer data acquisition systems for monitoring analog signals using digitizing eight channel modules. Providing all of our customers with low-cost, top-quality, reliable equipment.
Since our foundation, Enetics, Inc. has designed and manufactured PC-based solutions for very high-speed applications in four key areas, which includes data acquisition systems, parallel digital signal processing, signal waveform generation and playback and real-time signal waveform recording.
United Industrial Automation Inc., is dedicated to providing our customers with high quality automation solutions. Because of our size, our data acquisition systems can be adapted to many different industries and situations. With a majority of our staff members having over 20 years of engineering experience, United Industrial Automation Inc. has the knowledge and skills to offer proven solutions.
Dynamometers, which are also known as dynomometers, dynometers and dynos, are devices that measure the force generated by something, usually an engine. They can also be used to determine horsepower, maximum rotary speed and maximum power absorption. They are sometimes called motor testers when used for these purposes, though the term "motor tester" is frequently used in reference to electric motor diagnostic equipment.
SAKOR provides dynamometer test controls & equipment for a wide range of applications and its test cell control system is compatible with all types, including AC & DC motoring equipment among more.
PCE Americas, Inc. is a reliable supplier of high quality dynamometers. Our products are used for various applications and our force gauges are highly accurate with an accuracy of ±0.1%. These unprecedented solutions can be customized to handle surface weights beyond 100 tons and these items are very easy to use.
Since 1958, Go Power Systems has been providing engine testers worldwide with portable engine dynos, test cell equipment and data acquisition systems. Fifty+ years later, we continue to supply affordable, built-to-last engine testing solutions to a wide variety of industries.
Environmental test chambers reproduce environmental conditions within a contained space for the purposes of evaluating the long-term effects of specific changes upon objects such as industrial products and materials, electronic products and other components. These conditions simulate those which a product will typically encounter in the span of its useful life. Test results can show the process of product decay and degradation and help predict the potential lifespan of a product or material.
For over 70 years, Cincinnati Sub-Zero (CSZ) Products has designed, manufactured and serviced custom and standard environmental test chambers that exceed customers` expectations. Test Chambers include temperature, humidity, altitude, thermal shock, HALT & HASS, temperature/humidity/vibration and more.
Russells Technical Products has been designing and manufacturing environmental test chambers since 1972. With over 150 years of combined management experience, our company provides its customers with quality environmental test systems and advanced manufacturing techniques.
Hastest Solutions designs, manufactures and provides solutions for all environmental testing needs. For the full range of environmental test chambers, including HAST, temp/humidity, salt fog, solar radiation, and high temp ovens, please contact us.
Weiss Envirotronics is a worldwide leader in the design and manufacturing techniques of environmental test chambers. We offer a complete line of standard and custom chambers, from bench top models to full walk-in and drive-in solutions to meet any testing requirement.
Leak detection is the process of measuring the discharge of gases, liquids, or vacuums from closed systems. Leak detection can be completed via electronic, chemical, and sound-sensitive technologies. Most leak detectors are hand-held devices that are programmed to monitor specific conditions. In leak detection, the mobility of a leak detector is important because of the tight and complex networks of piping that are sometimes used to house a gas or a liquid.
Leak detection is one of the main services that we offer to our customers. Our customers come from everywhere in the United States and Canada, and we offer high-quality products backed by 45 years of experience.
Total vacuum and leak detection solutions, including VS Series Helium Mass Spectrometer Leak Detectors. We provide industry-leading mass spectrometer and selective ion pumping leak detectors in portable, mobile and component models, as well as primary, high and ultra-high vacuum pumps.
We manufacture top of the line leak detectors. Our teams are devoted to creating high quality solutions that are ideal for a number of applications. These products come with a number of benefits such as high speed mass flow leak testing, automatic calibration and temperature compensation.
Intek, Inc. produces chemical-type pipeline leak detectors, ideal for leak testing systems under air or gas pressure, even for testing telephone cable. Our product is available in a spray bottle, a dauber bottle and by the gallon.
Spectronics, the world leader in ultraviolet technology, is the manufacturer of the Spectroline® fluorescent leak detection products for refrigerant leak detection. Our AR-GLO® fluorescent dye is safe for AC&R systems, compressors and refrigerant appliances.
Load cells are measuring devices that monitor and gauge forces of compression, tension and shear. They are a type of transducer that converts sensed mechanical force into electrical signals for measurement used in mechanical testing, ongoing system monitoring and as components in devices such as industrial scales.
Our load cells are manufactured with the highest attention to detail at all stages. Whether it is through the design stage, engineering stage, or through hundreds of tests run daily, we ensure that our products outshine all competitor products. That is why high profile customers like NASA trust us with their business. Find out why we make all the difference by contacting us today!
Hirschmann Automation & Control, a leader in controls, load indication & load moment indications, offers superior load cell products. We offer load cell measuring & rated capacity indication systems for construction & material handling machines. Choose from an array of wired & wireless sensors: force gauges, force sensors, wind speed & pressure sensors. Serving OEM, retrofit, custom needs. Contact us today for more information!
Scales are weight measurement tools. They are used throughout industrial, commercial and consumer products contexts. They can be used to measure the weight of industrial ingredients and products, commercial commodities, medical products, agricultural products and even people.
Strainsert is a manufacturer of a variety of precision made scales, in addition to force sensing transducers, miniature load cells, pins & bolts. As a leading company who has served such industries as aerospace & marine, Strainsert will custom design & manufacture products to your exacting specifications and will provide the most responsive, accurate & efficient solutions for research.
PCE has a large inventory of scales and weighing technology, we stand behind our products with a 2-year warranty. We manufacture and supply a diverse range of scales for use in industrial, laboratory, and processing applications. From benchtop scales to crane scales, we know we have what you are looking for, and are ready to provide expert help! We want to be your partner for measurement, control, and weighing solutions.
Founded in 1950, Carolina Scales continues to provide the most advanced, yet cost-effective industrial scale technology. The best application-specific sales & service for a wide range of equipment, including bench scales, checkweighers, counting scales, crane scales, dimensional weighing, floor scales, truck/track scales, rental scales, plus data collection, calibration & more precision solutions!
Thermocouples are heat sensors and temperature controls used to measure temperature in a wide range of industrial, commercial and residential applications. Thermocouples, often called temperature probes or temperature sensors, consist of two dissimilar metals connected at two points.
In business since 1972, Thermo Sensors Corporation is a leading thermocouple manufacturer of an array of many products and services. Thermo Sensors provides the chemical, petrochemical, refining, food, pharmaceutical and other industries with options of standard & special designs.
Thermal Devices is your source distributor for stock or made-to-order thermocouples and many other temperature handling equipment and products. Thermal Devices is determined to provide you with a positive shopping experience.
We create a full line of thermocouples that are very affordable and long-lasting. These value added products are ideal for a number of industries including: chemical, power generation, pharmaceutical, pulp & paper, aircraft, steel, waste treatment, plastics, ceramics, heat treating, and much more! Our experts will work with you to find the best solution for your application.
Temperature Specialists, Incorporated is a manufacturer of quality thermocouples. Temperature Specialists provide solutions for your sensing needs by building to meet your specifications. Feel free to visit their comprehensive and helpful website for full descriptions of their state-of-the-art line of quality products.