Contact Us

Process Equipment Manufacturers and Companies

Process equipment is a term that applies to machinery is used for material and chemical processing. In general this can refer to equipment that is used for regulating the flow and treatment of a substance. Since process equipment is a term that can refer to many different applications, this equipment is utilized in a vast number of industries. These industries include: chemical, pharmaceutical, marine, petroleum, food & beverage, and more. The processing method can different based on the application however some industries rely on similar types of process equipment. Typically process equipment can come in different styles such as filters, flow control equipment, heat exchangers, lubrication systems, mixers and various other types of equipment.

Flow control devices such as vacuum pumps, flow meters, solenoid valves, centrifugal pumps, metering pumps, ball valves and butterfly offer different ways to control the flow of gases and liquids. These solutions are designed to not only control where the gas or liquid is flow but at what rate the substance is moving. Some applications require the flow to occur at various intervals so more specialized equipment as metering pumps and flow meters will be used to calculate the speed of the material.

Customization is a very important factor to process equipment. Many facilities have very unique conditions and some application may have special requirements based on the material being processed. Sometimes process equipment will be designed with filtration systems to eliminate unwanted particles in the material being processed. Process equipment is engineered with corrosion-resistant properties to handle materials that could be hazardous. Adequate maintenance is very critical for process equipment as the equipment could shut down the whole manufacturing process if the equipment is not functioning properly.

Dryers

Industrial dryers are often integrated into the final processing stages of a variety of bulk materials for the final removal of contaminating moisture. Products such as dry cereal or flour are rotated through an air dryer, rotary dryer or flash dryer to ensure the bulk solid or powdered material has the proper uniform consistency and will not grow bacteria due to moisture.

Carrier Vibrating Equipment, Inc.

Carrier Vibrating Equipment, Inc. is a turnkey supplier with experiences dating back to 1950. We create solutions for a wide range of industries including chemical, synthetics, foundry, glass, food, explosives, wood, coal, metals, pharmaceuticals, scrap and recycling.

International Process Equipment Company

International Process Equipment Company is an accomplished manufacturer of high powered pulverizers and industrial dryers. Our grinding mills come with a number of advantages including unique structural design, superior air flow and a wide range material processing.

Thermal Product Solutions (TPS, LLC)

Through its Gruenberg and Blue M brands, TPS offers a range of standard and custom industrial drying ovens. Delivering durability, innovation, and superior performance, Gruenberg ovens accommodate temperatures up to 1200F and are available in a number of configurations, including cabinet, truck in, and top loading models.

View a full list of Dryer Manufacturers

Heating Elements

Heating elements are the heat generation equipment in all electric heaters. Electric heating elements can be found in electric heating equipment of all shapes and sizes. Elements are manufactured in a variety of materials and configurations, but their function remains the same: to convert electrical energy into heat energy, then to transfer that heat energy to or through air, liquid or solids by convection, conduction or radiation.

Backer Hotwatt, Inc.

Hotwatt manufactures a complete line of heating elements for a wide range of uses. We offer a broad product line from electric to cartridge and countless other systems as well. For those difficult applications, custom products are also available. At Hotwatt, we have been creating elements for sixty years; let us put our expertise to work for you. Call today for a quote on you next project.

WATTCO™

No one is more experienced in the field of heating elements than WATTCO. With our complete line of electric heating elements, tubular heating elements, heating coils and ceramic heating elements, we guarantee service and quick delivery on all our products. Contact us today for your standard or specialized industrial heating solutions. We are your one stop shop for quality heating elements.

Ulanet™

Ulanet™ has 78 years of engineering and manufacturing experience in the production of cartridge, hermetically sealed, miniature, capsule, industrial thermostats, thermal time delay relays, immersion heaters, tubular heaters, miniature strip, bolt, cartridge heaters and numerous other heating elements. Let our proven capability help solve your heater or thermal control problem.

View a full list of Heating Elements Manufacturers

Industrial Ovens

Pulverizers de-agglomerate clumps or blocks of bulk solid materials into friable or free-flowing materials with uniform consistency. This is necessary for pneumatic or screw conveying as well as for uniform processing.

The GRIEVE Corporation

Our industrial ovens meet the requirements of OSHA and National Fire Protection Association Standard 86 for Class A ovens. Our rugged ovens are designed for a wide variety of heat processing applications.

Wisconsin Oven Corporation

Our industrial ovens are well known for being of high quality and excellent value. Our seasoned employees are committed to bringing you only the best customer service. We have made it our goal to make sure each and every customer is left with a smile on their face after working with our friendly, well trained staff.

Thermal Product Solutions (TPS, LLC)

Through our superior performance Gruenberg brand and reliable, value priced Blue M line, TPS offers a range of standard and custom industrial ovens that reach as high as 1200 °F.

View a full list of Industrial Oven Manufacturers

Mixers

Industrial mixers in a variety of configurations are used to blend multiple bulk or powdered materials together as part of a bulk material processing system. Mixers used in powder & bulk applications are typically paddle mixers or ribbon blenders; sometimes powdered or dry materials are mixed with wet materials to form products such as bread dough or slurries.

KADY International

KADY International is a leading manufacturer of industrial mixers with experiences dating back to 1949. Originally our mixers were designed for the paint industry but over the years we have expanded our customer base to include a wide range of industries.

Frain Industries, Inc.

Frain Industries was founded in 1981 and has grown over the years into the world's largest provider of high quality pre-owned packaging and processing machinery.

ARDE Barinco, Inc.

Founded in 1952 ARDE Barinco, Inc. has a rich history of providing our customers with the solutions that they rely on. The industrial mixers that we offer serve in many applications such as cosmetics, processed foods and specialty chemicals.

ProQuip, Inc.

Are you searching for industrial mixers? Your search is done and we supply the best quality industrial mixers on the market. We take pride in our manufacturing but also in our customer service. We are more than just a supplier; we desire a long lasting business relationship which results in years of customer satisfaction.

View a full list of Mixer Manufacturers

Pressure Vessels

Pressure vessels, often referred to as air pressure tanks are used for the storage and containment of fluids, vapors or gases at pressure levels greater than that of atmospheric pressure. They are designed to operate at pressures more than 15 psi, and are made of a variety of metals, high-strength plastic or fiberglass. The tanks are usually cylindrical in shape with a horizontal or vertical orientation.

Midwest Imperial Steel Fabricators, LLC

If you are looking for innovative pressure vessels, you've come to the right place! We actively manage your project every step of the way. We keep you informed of what we are doing to ensure we keep up to your standards and delivery times. We will deliver our products on time-every time! Contact us today or visit our website to find out more!

B.E. Peterson, Inc.

All of our pressure vessels are fairly priced and we take pride in saying we are an ASME U, UM, R, S and TUV certification manufacturer. We also offer CRN registration & CE / PED certification upon request. Here at BEPeterson we are experts in a number of fields including ASME tanks, filter vessels, PED pressure vessels, penstocks, pressure vessels and much more. If you would like more information please give us a call today!

Gladwin Tank Mfg., Inc.

Our pressure vessels are among the best in the industry. We provide our customers around the world with high quality products that are built to last. We manufacture all our products according to customer demand and in compliance with the highest ASME safety standards. We believe in doing things right the first time. Contact us today to learn more!

View a full list of Pressure Vessel Manufacturers

Pulverizers

Pulverizers de-agglomerate clumps or blocks of bulk solid materials into friable or free-flowing materials with uniform consistency. This is necessary for pneumatic or screw conveying as well as for uniform processing.

International Process Equipment Company

International Process Equipment Company is an accomplished manufacturer of high powered pulverizers and industrial dryers. Our grinding mills come with a number of advantages including unique structural design, superior air flow and a wide range material processing.

Granutech-Saturn Systems

Since 1971, Grautech Saturn has manufactured high quality products for crushing metal and shredding unwanted materials. Each staff member has an average of 13 years of experience in the shredders industry. Our systems are used in a wide variety of processes, including tire shredding, hazardous disposal, energy recovery, and metal processing.

Shred-Tech

Shred-Tech® is a leading manufacturer of technologies for the shredding and reduction of almost any sort of material imaginable. During our nearly forty years of shredding experience, we have helped customers reduce everything from tires to office paper - recently implementing a new hard-drive destruction unit.

SSI Shredding Systems, Inc.

SSI Shredding Systems, Inc. is a world class designer and manufacturer of industrial shredders and size reduction systems. Our company was started in 1980 and has designed, built, and supported shredding solutions all over the world.

View a full list of Pulverizer Manufacturers

Vibratory Feeders

Vibratory feeders are conveying ramps or feeding tubes which assist in transferring bulk and powder solids to and from conveyors, processes and hoppers. By vibrating the discharge end of a hopper or conveyor, powdered material caked on the sides and within is loosened until it falls freely. Bulk handling sometimes uses vibratory feeding ramps to convey over short distances, and most bulk bag filling, bag dumping and hoppers are equipped with vibrating feeders.

Eriez

Eriez is a world authority in separation techniques. We design, manufacture, develop, and market magnetic separation, metal detection and materials feeding (vibratory feeders), screening, conveying and controlling equipment for over 80 process and metal working industries.

Carrier Vibrating Equipment, Inc.

Carrier Vibrating Equipment, Inc. is a turnkey supplier with experiences dating back to 1950. We create solutions for a wide range of industries including chemical, synthetics, foundry, glass, food, explosives, wood, coal, metals, pharmaceuticals, scrap and recycling.

General Kinematics

General Kinematics has earned its place as the leader in the vibrating feeders industry with innovative and reliable equipment. These two values, innovation and reliability, are at the heart of our company's operation.

View a full list of Vibratory Feeder Manufacturers